for Audi A3 S3 RS3 8P 8V 8Y 2004-2025 Side Assist Blind Spot Monitoring Detection BSM BSD System 77Ghz & 24Ghz

Brief introduction:

Report Item
Product desciption:
1.This system is a vehicle assistance device that helps driver lane changing safely during driving.

2.With the aid of 77GHz microwave sensor, probe the side / rear of the vehicle for those moving objects into the blind spot of the detection zone.

3.The system works in a set of a control box (controlled by computer), two microwave sensors, two blind region monitor (or LED light), a buzzer and the wire harness which is the perfect connection of microwave and computer.

4.There is blind zone at the rear of the vehicle which is easy to endanger driving safety.! When you installed BSM into your lovely car, no matter it's day time, night time or even in the snow,you can be alerted whenever there is a moving object pop into the rear of the vehicle, with the aid of LED lighting on , blinking, buzzer sound so that the driver can be cautious when lane changing to avoid the possibility of side crash accident.

5.After the vehicle is stopped, the system delays for 30s. When there are bicycles, electric cars, motorcycles, pedestrians and other vehicles near the vehicle, the system will light up and there is a risk of opening the doors. Please confirm the safety before opening the doors.

Dangerous situations of parallel driving

Driving blind spots pose great harm and are prone to causing car accidents. Real time monitoring of blind spots is necessary. According to a survey conducted by the national traffic management department, nearly 276000 people die in road traffic accidents every year, with 70% of serious traffic accidents caused by lane changes, accounting for a large proportion of deaths.
So you need to install Blind Spot Detection

Six major functions

Proactively warn for safe lane changes and stay away from traffic accidents

1.BSD blind spot monitoring
2.AOA overtaking warning
3.LCA parallel auxiliary
4.B-pillar blind spot warning
5.RCTA reverse warning
6.BOW door opening warning

77Ghz and 24Ghz

Functional comparison and differentiation

BSD blind spot monitoring and warning

During the driving process, Car A can see from the rearview mirror that Car C cannot see Car B. If Car B overtakes at this time and Car A wants to change lanes to the left with a large turn signal, the first level yellow light will change to the second level yellow light and flash an alarm. The buzzer will beep three times!
BSD blind spot monitoring area

AOA active overtaking warning

When our vehicle is about to overtake the vehicle ahead, the rearview mirror does not give a warning;
When the other party's vehicle enters our blind spot, our vehicle has already overtaken the other party's vehicle and is preparing to merge into the same lane. The second level yellow light on the side mirror of the same direction turn signal flashes as an alarm!

LCA lane change auxiliary warning

During high-speed driving, if adjacent lanes approach us quickly from a distance of 40 meters, the system will automatically start monitoring;
For the target vehicle that poses a collision risk to the side and rear of our vehicle, the rearview mirror will light up to remind us!

RCTA reverse crossing warning

When our vehicle is about to reverse from the parking position, the system detects that when there are moving objects approaching, the second level red light on the rearview mirror flashes, the turn signal is turned on, and the buzzer will emit three "beep beep beep" alarm sounds!

DOW door collision warning

When our vehicle opens the door, if someone, car or other object appears, the rearview mirror LED light flashes and the buzzer beeps as a warning, reminding the driver or passenger not to continue opening the door and to pay attention to safety!

Equipped with the latest chip

Double sending and four receiving
Equipped with the latest technology algorithm chip, it solves problems such as false alarms and failure to display signals, accurately processes received information, and quickly responds to convey instructions

Real time monitoring and warning

No speed limit is required to start, the car starts working as soon as it starts

No need to cut or change lines

Installation at the original vehicle location
The radar sensor is installed in the original vehicle position with the product bracket, without the need to break or change the wiring, which does not affect the normal use of the original vehicle

Vehicle grade waterproof

This product supports vehicle level waterproofing, so you don't have to worry about rain damage

Suitable for various weather and road conditions

Not affected by the environment, not afraid of wind and rain

Sound and light warning

The lens indicator light is always on
Level 1 alarm
The LED indicator light is always on
Turn on the turn signal lens, the indicator light flashes and beeps, sounding an alarm
Level 2 alarm
Turn on the turn signal LED, the warning light flashes and beeps, sounding an alarm

Customizable icons

The display icons on the mirror can be customized here. If you need to customize the following icons, you can contact customer service. If you don't need customization, the icons that are suitable for your car model will be sent by default.

Support mirror heating function

All use original factory data 1:1 mold, made of PET+aluminum foil material, covering the entire lens to quickly heat the lens. The heating end is plated with 65 copper and sealed with adhesive

Independent system

Does not affect the original vehicle's functionality

Product accessories

Hidden radar sensor

Using 77Ghz millimeter wave radar technology, real-time detection on both sides of the rear
Installation steps

1. Remove the rear bumper and install the left and right millimeter wave radars (hidden installation in the original car style)

2. Wiring, extend the extension line to both sides of the front door according to the original vehicle route

3. Install a dedicated rearview mirror (connect the lens plug to the extension cable)

4. Adjust the radar angle to the optimal state for testing

5. Restore disassembled components and inspect the vehicle